today, I sanded away all the high spots on the seams, and shaped the centerboard trunk slot using a router, and 7" disc grinder (aka wood eraser). My arms are sore, but things are relatively fair. I will need to order the fiberglass this week. The plan is to use wide 6 oz cloth cut on a 45 degree bias, then apply 6 oz cloth over the whole hull. This will be a long and tedious, messy task but will add value and years to the boat as well as much needed protection from rocky beaches. I will put the keel on afterwards. 
the PVC roller system is working very well to get this in and out.
0 komentar:
Posting Komentar