Trying to push this project on toward completion, tonight I started measuring for the deck framing. So far, it has been mercifully simple.I clamped my big adjustable T-Square onto the forward frame at the centerline, and measured the halfway point between the frame and the breasthook. Then, I set my 48" ruler across that halfway point, at right angles to the T-Square. After determining the rulers contact point with the sheer was an equal distance from the frame on both sides, I clamped the ruler into place, and marked the sheers. Then, I measured the angle at the intersection of the ruler and the sheer. Thankfully, it was a very easy-to-cut 20°.
 |
| Measuring for the deck framing. |
 |
| The blocking for the deck framing required a simple 20° cut. Here is the starboard side being epoxied into place. |
 |
| Blocking for the deck framing on the port side. |
 |
| Here, the false battens on the floor are being epoxied into place. All those boards look a little excessive to my eye, but the false battens do serve a practical purpose. |
 |
| Tonight I drilled the holes & installed the stainless steel grab handle on the forward frame. The first time I rode in a Glen-L Utility, I realized this is a "must-have" item. |
 |
| Progress... |
0 komentar:
Posting Komentar