The inwales are glued in place with the temporary screws removed. I am trying to use as few metal fastenings as possible to keep the cost down. The System 3 Epoxy is quite strong itself. I have filled and taped the center seam and the forward bulkhead as well as the stem. Here are some photo updates. |
| forward bulkead as seen from inside. All taped. |
 |
| view of the center seam looking aft. It is clear to me at this point that there is no way the keel batten will go in without modifying of removing the center frame. |
 |
| View of the center seam at the forward bulkhead looking forward. The patch on the bottom is barely visible at this point in time. |
 |
| view looking forward. The seat risers and inwales are clearly viewed from this perspective. |
0 komentar:
Posting Komentar